Rental Equipment Richmond
Bon Tool Concrete Mixer
Concrete Wheelbarrow Mixer, Wheelbarrow mixer equipped with easy-to-clean thick polyethylene drum, Tubular steel frame is mounted with 13″ wheels, Handles
slide forward for storage, Drum maximum holding capacity of 2 cu. ft.
Builders Laser Level
- Streamlined, low profile design allows for easy carpet seaming
- Even heat distribution for thorough melting
- Heat shield to prevent backings from overheating
- Non-stick base for fast, easy clean-up
- “Comb Profile” forms ridges in adhesive for stronger carpet seams
- 3-way cord guide keeps cord out of the way
- Stay-cool handle and up-front thermostat make it easy to use
- Approximate heat range 135° to 425°
8 Gal Air Compressor
5.5-HP Honda GX Series OHV Engine
•High quality pilot valve
•Pneumatic throttle idle control
•Constant run control set at 105-125 PSI
Heavy-Duty Single Stage Cast Iron Pump
•Made in Somerset, PA USA
Belt Drive Design w/ Totally Enclosed Heavy-Duty Belt Guard
•Large flywheel for extra cooling and easier start-up
•Directional air shroud for reduced pump temperatures
8-Gallon Wheelbarrow Design w/ Convenient Lifting Handles
•Low profile, powder coated twin tank receivers
•Pneumatic tire makes it easy to move around the job site
Canister Inlet Filter
•With replaceable filter elements for extended pump life
•Anti-vibration feet & protectively mounted fittings
•Special unloading valves to assist in motor starting
•Tank gauge, regulator and outlet pressure gauge
•Stainless steel braided discharge hose
The OS552 conserves seed with Billy Goat’s exclusive Auto Drop feature by automatically starting or stopping seed drop with bale engagement. The heavy-duty bale controls both seed release and blade engagement. Select the correct drop rate without all the guesswork.
The 25-lb capacity front mounted poly seed box won’t rust or dent. On board instructions are conveniently mounted under the lid to help set seed drop rates.
Brush Cutter Mower
Graco Airless Paint Sprayer
- Endurance Pump for exceptional pump life with QuikAccess intake valve to easily clean or clear debris.
- SmartControl 1.0 Pressure Control – delivers a consistent spray fan.
- Enclosed DC Motor – protects internal motor components.
- Swivel Inlet Suction Hose – solid aluminum construction and no tools removal of hose.
- Easy Out Pump Filter – reduces tip clogs and ensures quality finish.
BCF1080 Bartell Plate Compactor
- BCF1080 Bartell 14″ x 22″ Single Direction Plate Compactor
Bartell forward plates are innovative, hard hitting, and low maintenance.Robust throttle controls why should you have to bend over and run next to your machine to make it stop? You’ll find conveniently mounted throttle controls standard on every piece of compaction in our lineup.
Retractable Wheel kits make it much easier to move your equipment to the site. Flip them down and roll. They simply lock up when you don’t need them.
Lifting bales maybe your work site is far off the beaten path? Every plate has a robust lifting bale to make it easier to move your equipment when a wheel kit won’t do.
Need to compact close to an edge? You can get right up against it with our straight-edge plate.
Ground Hog Post Auger
PowerEase Pressure Washer
This BE PowerEase pressure washer is great for the heavy duty homeowner or contractor. It is powered by an industrial Honda GX390 engine, one of the highest rated Honda engines on the market. The industrial triplex pump features an oil sight glass, oil drain plug, and an adjustable unloader. The powder coated steel frame comes with anti vibration rubber feet and frame cut outs to easily change the engine oil. The P3713 pressure washer also includes a built in unloader that has a built in plumbing and an easily replaceable unloader cartridge.
- Powder coated steel frame
- Thermal relief valve to prevent overheating
- Low pressure chemical injector
- Comet ZWK pressure washer pump
- Engine – Honda GX390 with low oil alert
- Water pressure – 3,700 PSI
- Gallons per minute – 4.0 GPM
- Cool Drive pressure washer includes –
- Industrial 5,000 PSI spray gun
- 36″ Insulated lance
- 3 spray nozzles
- Chemical injector nozzle
- 50′ steel wire braided hose
DeWalt Pressure Washer
PRESSURE WASHER 4200 PSI
- HONDA GX Commercial Series Engine Starts Easy, Runs Smoothly, and Delivers High Output
- Direct Drive Engine & Pump for Streamlined Power Transmission from Engine to Pump
- Triplex Pump Design with Ceramic Pistons and Thermal Relief Valve.
- Adjsutable Unloader system for added control and versatility.
- Welded Construction, 1-1/4″ Tubular Steel with Steel Engine Plate and Solid Steel 5/8″ Axle
- 3/8″ x 50′ Non-marring Hose with Quick Connectors for No Tools Assembly
- 5 Quick Connect nozzles (0°. 15°, 25°, 40°, & Soap) make swiching applications easy and fast!
- Downstream Detergent Injection System.
- FLOW RATE 4.0 GPM
- HOSE LENGTH 3/8″ X 50 FT
- OPERATING PRESSURE 4200 PSI
18″ x 36″ Tow Poly Lawn Roller
Polyethylene drum with side molded spokes. Steel tow bar with clevis hitch with pin. Dichromate finish hardware. 36″ wide. Capacity: 331 lb. 40 gallon. Drain plug included.
Brick Paver Saw
14|| Concrete Cut Off Saw - Stihl
|TS 420 STIHL Cutquik® Specifications – Professional Use|
|DISPLACEMENT||66.7 cc (4.07 cu. in.)|
|ENGINE POWER||3.2 kW (4.4 bhp)|
|WEIGHT*||9.6 kg (21.2 lbs.)|
|FUEL TANK CAPACITY||710 cc (24 oz.)|
|ENGINE SPEED||9,000 rpm (Elec. Gov.)|
|MAX. SPINDLE SPEED||5,350 rpm|
|ARBOR SIZE||20 mm|
|MAXIMUM WHEEL SIZE||350 mm (14″)|
|MAXIMUM CUTTING DEPTH||125 mm (4.9″)|
- Max. Standard Reach: 11′
- Standard Loading Height: 37″
- Loading Height with Loader 195: 2-4″
- Load Capacity: 150 lbs.
- Sheet Size & Capacity: single drywall sheets up to 4′ x 16′
- Power Source: Manual
- Lift Mechanism: Single Stage Cable
The newest entrant in the Vermeer pedestrian trencher lineup offers a productive and convenient to maintain machine that gets the job done right. The RTX250 features a 25 hp (18.6 kW) electronic fuel-injected (EFI) engine, digging depth capacity of 36” (121.9 cm), maximum digging width of 6” (20.3 cm) and a slender profile which allows the unit to move through narrow yard gates.
Milwaukee Super Sawzall
|Tool Warranty||5 Years|
|Keyless Adjustable Shoe||Yes|
|Keyless Blade Clamp||Yes|
Dosko Stump Grinder
|Engine||389cc Honda GX Engine|
|Teeth||Greenteeth® 500 Series Teeth (8)|
|Cutter Wheel||14″ Dia. x .375″ Thick|
|Drive||Direct Belt Drive; 3 Groove Power Band with Idler Bearing Belt Tensioners|
|Tires||4.80/4.00-8″ Adjustable Brake Band|
|Dimensions||58″ L x 32″ W x 51″ H|
|Cutting Capacity||20″ Above Grade, 16″ Below Grade|
Front Tine Tiller
Maxim’s largest transmission produces serious power with slower tine speeds (approx. 72 RPM Max.) that make it possible to break new ground, till deeper in one pass and work in heavy clay soils. The extra power makes it possible to use the large, water filled tractor-type wheels to pull plows, cultivators, and other accessories. The MT50B is made with substantial gardens and tough conditions in mind.
• Rugged all-steel construction
• Simplicity of design for ease of use and maintenance
• Adjustable tilling width
• Repairable transmission
• Drag bar
• Heavy-duty welded tines
TILLING WIDTH – 9″
TILLING DEPTH -10″ or reverse tines to shallow cultivate 2″ to 3″
WEIGHT – 20 pounds
STARTING/OPERATING – Recoil (pull starter rope to start)
EZ Load 15' Trailer
Hand-held 1/2″ drill-powered machine. For cleaning small, inside lines 1 1/4″ – 2 1/2″ in diameter up to 25 Ft.
Professionally engineered to clean 1-1/4″ to 3″ diameter drain lines up to 50 Ft. Typical applications include vents, downspouts, kitchen drains, etc.
The Model Z5–AF Drain Cleaning Machine features 2-way auto cable feed that advances and retrieves cable with the push of a lever. 75 ft. cables.
Cleans 3″ – 10″ dia. lines up to 200 ft. The original dual cable sectional drain cleaner from Electric Eel. The Model C runs up to 100 Ft. of 1-1/4″ self-feeding cables.
24'x14|| Aluminum Walkboard
As the first machine in the vertical path line up, the Bobcat® S530 skid-steer loader is ideal for working in tight areas where reach at the top of the lift cycle is needed. Load materials into a truck bed or use in pallet fork applications, plus enjoy all the other benefits of an M-Series loader.
Toro Dingo TX 427
The gas-powered narrow and wide track TX 427 loaders feature 27-hp Kohler engines that deliver added torque for increased pulling and digging force.
- Narrow-track model has 535-lb. rated operating capacity, 92-in. length, 33.7-in. width and 5.1 psi of ground pressure
- Wide-track model features a 535-lb. rated operating capacity, 92-in. length, 41-in. width and 3.5-psi ground pressure
can pump 19-hp flow to attachments for increased productivity in ground-engaging applications
- Both units are compatible with Toro’s compact utility loader attachments
The TX 427 Dingo compact utility loaders feature a 535-lb. rated operating capacity (35% of tip capacity) and a 27-hp Kohler gasoline engine that delivers added torque for increased pulling and digging force. Weighing 2,006 lbs. with standard bucket, the narrow track version has a 92-in. length with bucket and a 33.7-in. width. The 5.9-in. (wide) tracks generate 5.1 psi of ground pressure. The wide track model weighs 2,186 lbs. with standard bucket, yet generates 3.5-psi ground pressure. It has an overall length of 92 in. and a 41-in. wide track setup. Both models have four independent hydraulic pumps that deliver 16.9 gpm to each track, 11.4 gpm to the auxiliary hydraulics and 6 gpm to the loader arm. Auxiliary hydraulics supply a 19-hp flow to the attachment.
Magnesium Bull Float 48||
Made by Marshalltown from the finest extruded magnesium alloy. Lightweight, long wearing and properly balanced. Both ends are rounded to help eliminate finishing marks. Requires threaded male end handle. 48″ x 8″. Handle must be ordered separately.
Roberts Power Stretcher
Power stretcher kit includes: 1 power unit, tail block with wheels, three 3′ extension tubes, Quik Loc tube, and a wheeled carrying case. GT power-lok switch handle locks into 17 different stretch/pattern holding positions; unique swivel head forstretching angles or corners, variable pin penetration for different carpet thicknesses, low profile head with sidekicking platform makes it compatible with a knee kicker, new design steel handle on head for better grip and repositioning, standard 18″ tail block includes a foam wall protector and wheels for easy repositioning. Stretches up to 23-1/2′.
21 Ton Log Splitter
Features a 650 series, 173 cc MTD Gold engine. 19 second cycle time with auto cylinder return. Easily converted from verticle to horizontal operation with spring-loaded quick connect latch. 2 stage hydraulic pump with coil wrapped pressure hose that maintains 3200 P.S.I. during operation. 3 gallon hydraulic tank with oil included. 25″ capacity with replaceable cast-iron cutting wedge. 16″ x 4.8″ pneumatic tires with poly fenders for over the road towing. 2″ locking ball hitch and jack stand. Standard log cradles.
Hitachi Finish Nailer
- Integrated air duster: Clear away debris and saw dust with the on-board air duster. Simply press the button and clear the surface where you need to place the nail.
- Tool free depth adjustment provides simplicity and flexibility when fastening various types of wood.
- Selective actuation: A simple flip of the switch allows for either sequential or contact nailing. No additional parts or tools required.
- Easy clear nose: Should a nail jam, the easy clear nose provides easy access to minimize disruption.
- 360 degree adjustable exhaust: Limitless exhaust direction adjustment ensures no one gets blasted with debris.
- Air duster clears away debris and saw dust
- Bump fire or contact fire modes
10' Fiberglass Step Ladder
The 6210 Fiberglass 10 ft Step Ladder is ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the Lock-In System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
| Power adjust
| Excellent balance—easy to use all day long
| Rubber grip on front barrel—eliminates pinched fingers and hands
| Twist lock front end—easy to clean
| Rugged polyamide housing—reduces heat transfer and maximizes operator comfort
Soft, recoil-absorbing handle—for increased operator comfort
- Remove up to 200 sq. ft. per hour of vinyl or other related soft material (Square footage amounts and time schedules will vary based on material and adhesion)
- Folding handle for easy transport & storage
- Sharktooth wrench for easy blade changes
- Heavy-duty steel material deflector shield
Stihl 12|| Pole Saw
Whether you’re pruning low-hanging branches or trimming up high, cutting performance is key. The gasoline-powered STIHL HT 101 allows you to quickly adjust between 7’6” and 11’6” shaft lengths to bring down those hard-to-reach branches. Even at full extension, this pruner is easy to control and feels well-balanced in hand. If your job demands height versatility, this pruner delivers a great price-to-performance ratio. And if you have a great deal of pruning to do, take a look at our HT Carrier System, designed to transfer the weight from your arms to your shoulders.
3/4|| Utility Pump 1/6 H.P.
Wayne Water Systems
Oil-Free Continuous-Duty Pump
Pumps up to 3000 GPH at 0′. Reinforced thermoplastic oil-free submersible utility pump. Bottom suction design filters and removes water down to 3/8″ of surface. 1-1/4″ NPS discharge with 3/4″ garden hose adapter included. Continuous-duty pump you can take anywhere. Oil-free design protects aquatic life. Easy carry handle for portability.
Wayne Water Systems Oil-Free Continuous-Duty Pump Pumps up to 3000 GPH at 0′. Reinforced thermoplastic oil-free submersible utility pump. Bottom suction design filters and removes water down to 3/8″ of surface. 1-1/4″ NPS discharge with 3/4″ garden hose adapter included. Continuous-duty pump you can take anywhere. Oil-free design protects aquatic life. Easy carry handle for portability.
Skidsteer Concrete Breaker
|Operation Weight Mount Cap + Rod|
|Weight of Main Body||KG||76|
|Required Oil Flow||L/MIN||30~90|
|Applicable Carrier Weight||TON||1.5~4|
2 H.P. Gas Centrifugal Pump
The GX200 Semi-Trash Pump is powered by a reliable 196cc Honda gas engine with engine oil alert.
- Recoil Start & Low Oil Alert
- Fuel Tank Capacity 0.82 GAL. (3.1L)
- 2″ Intake Connection MNPT
- 2″ Outlet Connection MNPT
- 125 GPM Max Flow
- 82′ Total Lift
- 26′ Suction Lift
- Up To 5/8″ Solids
Compound 12|| Mitre Box
Bissell Carpet Cleaner
Professional-grade carpet cleaning, any time you want.
Get professional-grade carpet cleaning any time you want with the BISSELL Big Green Carpet Cleaning Machine; it even outcleans the leading rental carpet cleaner.* The large-capacity clean- and dirty-water tanks mean you get our best deep clean with fewer trips to the sink. Remove deep-down dirt from carpet with rotating DirtLifter® PowerBrushes that clean in both the forward and backward pass and stay comfortable while cleaning, thanks to the ergonomically designed, adjustable tank handle. The powerful clean you want is now available in your home.
- Outcleans the leading rental carpet cleaner for professional-grade results*
- Cleans on the forward and backward pass for reduced cleaning time and dries faster than the leading competitive rental carpet cleaners
- Rotating DirtLifter® PowerBrushes
Walk Behind Concrete Floo Saw
Bartell uses an improved polypropylene water tray on most of its tile saws. It offers better durability and support than ABS trays and is lighter than stainless steel trays. Trays are backed by a 2 year warranty.
A high-output water pump provides sufficient cooling water flow for maximum protection of the the diamond blade.
Adjustable Cutting Height
Cutting depth can be easily adjusted to accommodate 6″ to 10″ (15-25 cm) blades and to provide plunge cutting functionality.
Rubber Matted Cutting Table
The new cast aluminum cutting tables are covered by a rubber mat that is injected directly onto the table and chemically bond for enhanced durability.
Water Tray Bracket
The water tray is secured in place by an easily accessible bracket.
Table Retention Device
The cutting table is equipped with a spring lock to secure the cutting table when transporting the saw in between job sites.
Thermal Overload Protection
Automatic thermal overload protection prevents the motor from overheating and protects the saw from power surges.
Blade Guard with Brushes
The blade guard contains brushes that not only minimize spray, but they also uniformly distribute the water over the blade for more effective cooling.
PRO 14® Brake
The PRO 14 brake combines a 14″ throat depth with a wide, 2-3/8″ mouth opening and patented inside working pockets. From soffit and fascia to custom brickmold, sill trim, window casing, chimney flashing and more, the PRO 14 easily produces custom pieces for any siding and roofing application. Its efficient, secure locking system uses a pulling motion rather than pushing, allowing you to be closer to the tool when working with larger pieces. Individual bending handles also enhance easy operation, letting you get closer to the work. Our patented Moving Pivot Hinge allows increased bending power, and our unique hemming capability allows for 180-degree overbends to produce more rigid panels.
Available Lengths: 8′ 6″, 10′ 6″, 10′ 6″ Heavy Duty, 12′ 6″
Weight: 8′ 6″ brake 87 lbs; 10′ 6″ brake 106 lbs; 10′ 6″ heavy duty brake 127 lbs; 12′ 6″ brake 129 lbs.
Throat Depth: 14″
Mouth Opening: 2-3/8″
Bartell Tile Saw
Pex Type Crimp Tool
Barreto Rear Tine Tiller
Model 918H: Honda GX270 9HP
Model 918S: Subaru EX27 9HP
Tilling Width: 18″
Weight: 460 lbs.
Hydraulic Reservoir: 7.8 gallons
Ground Drive Forward: 78 ft/min
Ground Drive Reverse: 78 ft/min
Handlebar Pivot Angle: Up to 20˚
Toro Mud Buggy
The Mud Buggy offers versatility and flexibility to any task. Its compact size and maneuverability allow you to dump material in tough to reach areas. And, its capacity to hold up to 16 cubic-feet of material make your job more productive. Operation around your job site is also simple, safe, and controlled with the patented ride-on operator platform and dual-action dump pedal.
Toro Concrete Mixer
This nine cubic-foot, heavy-duty side-dump mixer with a durable steel drum is perfect for large concrete batches.